Bitrate vs sample rate: the difference, with an example

Sample rate is how many measurements of the sound wave are taken each second (Hz).

Sample rate is how many measurements of the sound wave are taken each second (Hz). Bitrate is how many bits each second of audio takes up after encoding (kbit/s). For uncompressed audio bitrate is sample rate times bit depth times channels; a compressed format can keep the same sample rate and use a far lower bitrate.

Also searched as "sample rate vs bitrate" and "sample rate or bitrate".

Bitrate and sample rate side by side

TermWhat it isMain source
BitrateBitrate is the number of bits used to store or send each second of audio, usually written in kilobits per second (kbit/s).Wikipedia, Bit rate
Sample rateSample rate is how many times per second a digital recording measures the sound wave, written in hertz or kilohertz.Wikipedia, Sampling (signal processing)

What the sources say about bitrate vs sample rate

  • Wikipedia, Sampling (signal processing). Sampling rate is samples per second; Nyquist frequency is half of it. Read on 22 October 2026.
  • Wikipedia, Bit rate. Bit rate is bits per unit time; uncompressed audio = sample rate x bit depth x channels; CD audio 1,411,200 bit/s. Read on 22 October 2026.

How Autrans treats the difference

The engine decodes any upload to 16 kHz mono for recognition, so sample rate is fixed on the engine side, while the recorder picks a 64 kbit/s bitrate for speech sent to the server to keep files small on slow connections.

A worked example of bitrate vs sample rate

Uncompressed 16 kHz, 16-bit, mono = 16,000 x 16 x 1 = 256,000 bit/s. The same 16 kHz audio encoded at 64 kbit/s keeps the sample rate but uses a quarter of the bits.

Related terms

Questions people ask

What is the difference between bitrate and sample rate?

Sample rate is how many measurements of the sound wave are taken each second (Hz). Bitrate is how many bits each second of audio takes up after encoding (kbit/s).

Does the difference change anything in Autrans?

The engine decodes any upload to 16 kHz mono for recognition, so sample rate is fixed on the engine side, while the recorder picks a 64 kbit/s bitrate for speech sent to the server to keep files small on slow connections.

Where does this definition of bitrate vs sample rate come from?

It rests on Wikipedia, Sampling (signal processing) and Wikipedia, Bit rate, read on 22 October 2026. What each source supports is listed above, next to its link.

Can you give an example of bitrate vs sample rate?

Uncompressed 16 kHz, 16-bit, mono = 16,000 x 16 x 1 = 256,000 bit/s. The same 16 kHz audio encoded at 64 kbit/s keeps the sample rate but uses a quarter of the bits.

Related

Start transcribing free

Send Autrans into your next meeting, use it in the room, or upload a recording. Your first 30 minutes are free, given once, and no credit card is needed to start.

Last checked 22 October 2026. How we measure accuracy. Spotted a mistake? Write to hello@autrans.online.