Bitrate: number of bits used to store

Bitrate is the number of bits used to store or send each second of audio, usually written in kilobits per second (kbit/s).

Bitrate is the number of bits used to store or send each second of audio, usually written in kilobits per second (kbit/s). For uncompressed audio it equals sample rate times bit depth times channels. Compressed formats pick a lower bitrate to make smaller files at some cost in detail.

Also searched as "audio bitrate", "bit rate" and "kbps".

What the sources say about bitrate

  • Wikipedia, Bit rate. Bit rate is bits conveyed or processed per unit of time (bit/s, kbit/s); file bit rate is size in bytes divided by playback seconds times eight; uncompressed audio bit rate = sample rate x bit depth x channels; CD audio is 44,100 x 16 x 2 = 1,411,200 bit/s. Read on 22 October 2026.

Bitrate in Autrans

Speech recorded in Autrans' own recorder and sent to the server is encoded at 64 kbit/s, because the engine decodes to 16 kHz mono and a higher rate only adds bytes on the connections the product runs on. A four-hour take is about 115 MB at that rate. Uploads over 300 MB are refused with a message to trim the file first.

A worked example of bitrate

64,000 bit/s x 3,600 s / 8 = 28.8 million bytes per hour, so 4 hours is 115.2 MB. CD-quality audio is 1,411,200 bit/s, which is 635 MB per hour.

Terms next to bitrate

  • Sample rate: Sample rate is how many times per second a digital recording measures the sound wave, written in hertz or kilohertz.
  • Opus codec: Opus is an open audio codec standardised by the IETF in RFC 6716 for interactive speech and music: calls, video conferencing, in-game chat.
  • AMR codec: AMR (Adaptive Multi-Rate) is a speech codec developed for GSM and chosen for 3G phones.
  • Lossless audio: Lossless audio is compressed or stored so the original can be reconstructed exactly, bit for bit.
  • Bitrate vs sample rate: Sample rate is how many measurements of the sound wave are taken each second (Hz).

Questions people ask

What does bitrate mean?

Bitrate is the number of bits used to store or send each second of audio, usually written in kilobits per second (kbit/s). For uncompressed audio it equals sample rate times bit depth times channels.

How does bitrate show up in Autrans?

Speech recorded in Autrans' own recorder and sent to the server is encoded at 64 kbit/s, because the engine decodes to 16 kHz mono and a higher rate only adds bytes on the connections the product runs on. A four-hour take is about 115 MB at that rate.

What is the difference between bitrate and sample rate?

Sample rate is how many measurements of the sound wave are taken each second (Hz). The full answer, with sources, is on the page for Bitrate vs sample rate.

Where does this definition of bitrate come from?

It rests on Wikipedia, Bit rate, read on 22 October 2026. What each source supports is listed above, next to its link.

Can you give an example of bitrate?

64,000 bit/s x 3,600 s / 8 = 28.8 million bytes per hour, so 4 hours is 115.2 MB. CD-quality audio is 1,411,200 bit/s, which is 635 MB per hour.

Related

Start transcribing free

Send Autrans into your next meeting, use it in the room, or upload a recording. Your first 30 minutes are free, given once, and no credit card is needed to start.

Last checked 22 October 2026. How we measure accuracy. Spotted a mistake? Write to hello@autrans.online.