Lossless audio: compressed or stored

Lossless audio is compressed or stored so the original can be reconstructed exactly, bit for bit. FLAC is the open lossless format (IETF RFC 9639).

Lossless audio is compressed or stored so the original can be reconstructed exactly, bit for bit. FLAC is the open lossless format (IETF RFC 9639); uncompressed WAV is also lossless. Lossy formats such as MP3 save space by throwing some detail away for good.

Also searched as "lossless", "flac", "wav" and "lossless audio format".

What the sources say about lossless audio

  • Wikipedia, Lossless compression. Lossless compression allows the original data to be perfectly reconstructed; lossy permits only an approximation; FLAC, ALAC, Monkey's Audio and WavPack are listed lossless audio formats. Read on 22 October 2026.
  • rfc-editor.org, rfc9639. FLAC is a lossless audio codec: PCM with 1 to 8 channels, sample rates 1 to 1,048,575 Hz, bit depths 4 to 32; streams begin with the marker fLaC; Proposed Standard. Read on 22 October 2026.

Lossless audio in Autrans

FLAC and WAV are accepted for upload. Lossless files are large, so the 300 MB upload limit can bite long recordings. Because the engine decodes everything to 16 kHz mono for recognition, a lossless source cannot add detail beyond what that holds. Autrans has not published a measured accuracy difference between lossless and compressed sources.

A worked example of lossless audio

One hour of CD-quality WAV is about 635 MB (1,411,200 bit/s x 3,600 s / 8), more than twice the 300 MB limit. The same hour as FLAC is smaller, with identical decoded audio. Trimming the file or exporting a speech-rate copy gets it under the limit.

Terms next to lossless audio

  • Bitrate: Bitrate is the number of bits used to store or send each second of audio, usually written in kilobits per second (kbit/s).
  • Sample rate: Sample rate is how many times per second a digital recording measures the sound wave, written in hertz or kilohertz.
  • Opus codec: Opus is an open audio codec standardised by the IETF in RFC 6716 for interactive speech and music: calls, video conferencing, in-game chat.
  • AMR codec: AMR (Adaptive Multi-Rate) is a speech codec developed for GSM and chosen for 3G phones.

Questions people ask

What does lossless audio mean?

Lossless audio is compressed or stored so the original can be reconstructed exactly, bit for bit. FLAC is the open lossless format (IETF RFC 9639); uncompressed WAV is also lossless.

How does lossless audio show up in Autrans?

FLAC and WAV are accepted for upload. Lossless files are large, so the 300 MB upload limit can bite long recordings.

Where does this definition of lossless audio come from?

It rests on Wikipedia, Lossless compression and rfc-editor.org, rfc9639, read on 22 October 2026. What each source supports is listed above, next to its link.

Can you give an example of lossless audio?

One hour of CD-quality WAV is about 635 MB (1,411,200 bit/s x 3,600 s / 8), more than twice the 300 MB limit. The same hour as FLAC is smaller, with identical decoded audio. Trimming the file or exporting a speech-rate copy gets it under the limit.

Related

Start transcribing free

Send Autrans into your next meeting, use it in the room, or upload a recording. Your first 30 minutes are free, given once, and no credit card is needed to start.

Last checked 22 October 2026. How we measure accuracy. Spotted a mistake? Write to hello@autrans.online.