AMR codec: narrowband AMR samples at 8 kHz with eight modes

AMR (Adaptive Multi-Rate) is a speech codec developed for GSM and chosen for 3G phones. AMR and 3GP are on Autrans' accepted list on purpose.

AMR (Adaptive Multi-Rate) is a speech codec developed for GSM and chosen for 3G phones. Narrowband AMR samples at 8 kHz with eight modes from 4.75 to 12.2 kbit/s. AMR-WB is the wideband version, sampling at 16 kHz with nine modes from 6.6 to 23.85 kbit/s. AMR files begin with the text '#!AMR'.

Also searched as "amr" and ".amr".

What the sources say about AMR codec

  • rfc-editor.org, rfc4867. RFC 4867 (April 2007): AMR has eight narrowband modes 4.75 to 12.2 kbit/s at 8000 Hz with 20 ms frames; AMR-WB has nine wideband modes 6.6 to 23.85 kbit/s at 16000 Hz; single-channel AMR files start with '#!AMR\n', AMR-WB with '#!AMR-WB\n'. Read on 22 October 2026.

AMR codec in Autrans

AMR and 3GP are on Autrans' accepted list on purpose: they are the formats African feature phones and many voice recorders produce, and an earlier narrower list that rejected them was called 'exactly backwards for this market'. The engine decodes them through FFmpeg when its first decoder cannot read them. Browser-side repair cannot open AMR at all, so a damaged AMR is not fixed in the page.

A worked example of AMR codec

Narrowband AMR at its top mode, 12.2 kbit/s, is 12,200 x 3,600 / 8 = 5.49 MB per hour of audio, less than a hundredth of the size of an hour of CD-quality WAV (635 MB).

Terms next to AMR codec

  • Bitrate: Bitrate is the number of bits used to store or send each second of audio, usually written in kilobits per second (kbit/s).
  • Sample rate: Sample rate is how many times per second a digital recording measures the sound wave, written in hertz or kilohertz.
  • Opus codec: Opus is an open audio codec standardised by the IETF in RFC 6716 for interactive speech and music: calls, video conferencing, in-game chat.
  • Lossless audio: Lossless audio is compressed or stored so the original can be reconstructed exactly, bit for bit.

Questions people ask

What does AMR codec mean?

AMR (Adaptive Multi-Rate) is a speech codec developed for GSM and chosen for 3G phones. Narrowband AMR samples at 8 kHz with eight modes from 4.75 to 12.2 kbit/s.

How does AMR codec show up in Autrans?

AMR and 3GP are on Autrans' accepted list on purpose: they are the formats African feature phones and many voice recorders produce, and an earlier narrower list that rejected them was called 'exactly backwards for this market'. The engine decodes them through FFmpeg when its first decoder cannot read them.

Where does this definition of AMR codec come from?

It rests on rfc-editor.org, rfc4867, read on 22 October 2026. What each source supports is listed above, next to its link.

Can you give an example of AMR codec?

Narrowband AMR at its top mode, 12.2 kbit/s, is 12,200 x 3,600 / 8 = 5.49 MB per hour of audio, less than a hundredth of the size of an hour of CD-quality WAV (635 MB).

Related

Start transcribing free

Send Autrans into your next meeting, use it in the room, or upload a recording. Your first 30 minutes are free, given once, and no credit card is needed to start.

Last checked 22 October 2026. How we measure accuracy. Spotted a mistake? Write to hello@autrans.online.